Explain the causes of the increase in violence and deaths of young Essay

Explain the causes of the increase in violence and deaths of young people due to guns, knives and gangs and discuss the various policing challenges this presents - Essay Example In fact, there have been reports of children as young as 11 being murdered, not out of personal violence, but gang crimes such as the unfortunate murder of 11 year old Rhys Jones. Worse still is the fact that street brawls include more than just fists and kicks now – they include the very real possibility of knives and guns. To get an idea of how widespread the problem is, a 2007 report stated that there are over 600 to 700 young people between the ages of 10 to 19 involved in gang activity, having affected the lives of over 8100 others (Pitts, 2007). In 2009 it was reported that there has been a seventy five percent increase in the number of teenage stab victims over sixteen, and an almost staggering ninety percent increase in the number of stab victims under the age of sixteen (Blair, 2009). The questions is, however, when did this shift arise, and why has it arisen in the first place? What are the reasons that younger children are submerging themselves into this violent culture and finding themselves the dangerous target of an armed child? Where do these children get access to the weapons they use and who is responsible for making it possible? The main problem with gathering data on youth criminals is the fact that it is often a widespread grey area where the question of motivation is concerned. Is it possible for a child or teenage to act of completely independent motivation? If so, one may wonder where motivation arises from and is that source of motivation in any way to blame for the uncultured reaction of an individual not yet considered a mature adult by society. And if not, what are the factors influencing these crimes, and who are these children acting in support with. The obvious answer might be gang activity, but the further confusion arises when one considers that not all criminal youth activity is motivated by gangs, and vice versa. So how is one expected to offer some clarity into this blurred line? Perhaps one

Implications of Clonal Genome Evolution for Cancer Medicine Essay

Implications of Clonal Genome Evolution for Cancer Medicine - Essay Example In addition, the authors show their level of knowledge of the topic at hand in that it is pretty fluent going by the information presented in the past, present and future application of genetics in the treatment of cancer. The above implies that the authors have a huge bank of knowledge of the issue. This is a fact that is difficult to refute as even the terms applied in the article only ooze competence in the field by even the comparisons made between certain aspects of cells as found in the research work. Such a thing can only be done by a person with adequate knowledge on the issues at hand, and not anyone who thinks they have adequate information on the topic, which is the case with this article. In order to appeal to the emotions of the audience, the authors apply a number of strategies that come in handy to content delivery. As such, the authors apply facts and the informative nature of the article to appeal to the audience in that, by being based on a science subject, it bring s forth information directly. In relation to this, the article does not leave the audience to seek the important point for themselves but instead, contains every kind of information that the audience would need to comprehend. The pathos of the article begins with the direct statement of the motive or goals of the article and graduates to the evolution of cancer, which is presented with facts about evolutionism, and then goes further to make deductions of the implications of the history to modern times.... th a strong sense of authority in genetics based on the lingo applied to deliver the content, which is a non-hesitant flow of word after word, which all show how much interest the author has. As such, the authors express their interest in the issue following the efforts that have been made in the field of medicine in order to inch closer to some form of treatment and understanding of cancer and its implications. With this in mind, the article shows how much the authors have gone through in order to deliver the content, which is further proof of their vested interest in the subject of evolution and cancer for the audience to pay attention. In addition, the authors show their level of knowledge of the topic at hand in that it is pretty fluent going by the information presented on the past, present and future application of genetics in the treatment of cancer. The above implies that the authors have a huge bank of knowledge of the issue. This is a fact that is difficult to refute as eve n the terms applied in the article only ooze competence in the field by even the comparisons made between certain aspects of cells as found in the research work. Such a thing can only be done by a person with adequate knowledge on the issues at hand, and not anyone who thinks they have adequate information on the topic, which is the case with this article. In order to appeal to the emotions of the audience, the authors apply a number of strategies that come in handy to content delivery. As such, the authors apply facts and the informative nature of the article to appeal to the audience in that, by being based on a science subject, it brings forth information directly. In relation to this, the article does not leave the audience to seek the important point for themselves but instead,

Homeostasis And Goldfish Respiration Physical Education Essay

Homeostasis And Goldfish Respiration Physical Education Essay Every organism possesses a mechanism for maintaining homeostasis. Homeostasis is the ability of the body or a cell to seek and maintain a condition of equilibrium or stability within its internal environment when dealing with changes in the external environment. Regulation of temperature is most definitely the most important aspect of homeostasis. Fish are cold-blooded animals. Most fish cannot control their internal body temperatures. Most fish body temperatures change with the temperature of the water around them. In order to obtain temperature homeostasis, the fish seek colder or warmer water. They lose metabolic heat through their gills. There are different types of metabolic adaptations in fish. Temperature and blood pressure are two. Cold-blooded animals must regulate their body temperature by moving. Literary Discussion Homeostasis and the Respiration of Goldfish What is Homeostasis? Homeostasis is the ability of the body or a cell to seek and maintain a condition of equilibrium or stability within its internal environment when dealing with external changes (www.biology-online.org/dictionary/Homeostasis). The main function of homeostasis is to keep all the processes of the body stable even if there are variations in the weather and environment outside (http://www.buzzle.com/articles/what-is-homeostasis.html). Regulation of temperature is most definitely the most important aspect of homeostasis. Warm blooded animals are able to retain a more adjustable constant body temperature. In humans, homeostasis happens when the body regulates body temperature in an effort to maintain an internal temperature around 98.6 degrees Fahrenheit (http://www.biology-online.org/dictionary/Homeostasis). For instance, when it is hot outside your body sweats to cool off, and we shiver to warm up during the cold seasons. Unlike humans, most fish cannot control their internal body temperatures. Fish are cold-blooded creatures. Some fish have mechanisms to keep a healthy temperature. In order to obtain temperature homeostasis, the fish seek colder or warmer water. Certain types of fish such as tuna fish control their body temperature by a specialized heat exchange system of blood vessels. Most fish are poikilothermic which means their body temperature changes with the temperature of the water around them. For instance, if the top of a pond is frozen over, the fish swims to the bottom of the pond to try to stay at a comfortable temperature. All animals create heat from metabolic activity. Metabolic activity includes breaking down food and movement (http://www.ehow.com/facts_7433473_fish-homeostasis-different-water-temperatures.html). Animals such as fish lose metabolic heat through their gills. This happens because the heated blood that runs through vessels in the gills comes into close contact with the colder water outside, and all the heat is lo st. Many diseases are a result of disturbance of homeostasis. This condition is known as homeostatic imbalance. Every organism will lose efficiency in its control systems as it ages. Homeostatic imbalance is responsible for the physical changes associated with aging along with the internal environment. Inefficiencies gradually increase the risk for illness because of the unstable internal environment. It has been seen where alleged negative feedback mechanisms become overwhelmed and destructive positive feedback mechanisms then take over. Negative feedback is mainly how homeostasis is maintained, and positive feedback includes processes like blood clotting (http://www.biology-online.org/biology-forum/about2004.html). In maintaining homeostasis, the kidneys, liver, and brain are the organs in which play an important role. The kidneys are responsible for controlling blood water level, and regulation of salt and ion content in the blood. The liver performs the function of stabilizing carbohydrate metabolism and metabolizing toxic substances (http://www.buzzle.com/articles/what-is-homeostasis.htm.l) Whereas, the brain helps in controlling the autonomic nervous system and the endocrine system. Dehydration, hypertension, diabetes, hypoglycemia, etc are major homeostatic imbalance health problems. Homeostasis is extremely important for proper functioning of all human body systems. Enzymes even need a specific constant temperature to work at their optimum level. At higher temperatures, the enzymes will stop working. Homeostasis occurs to all humans, animals, and plants and is needed for us to stay healthy and alive. There are different types of metabolic adaptations in fish. Temperature and blood pressure are two examples. Body temperature for a fish mainly depends on the temperature of the water that the fish is in. This is the same for a fish in a tank, lake, pond, river, ocean, etc. A fish body adjusts to the temperature where the fish will be comfortable in the water. Cold-blooded animals cannot generate their own body heat; they must regulate their body temperature by moving. Absorptive and post absorptive are two metabolic states. Digestion, strength, respiration, salt and water balance, and heart rate are also included in this category. Glycolysis is an anaerobic metabolic pathway. Homeostasis in fish as well as in humans adjusts when the environment that it is in adjusts. If a fish is swimming in polluted water, the water is going to affect the fish. Its going to affect the fishs vision, the fishs breathing, and many other things. Just like polluted air causes humans to get a disease or any other illness, a fish can get a disease or illness as well. The temperature will affect the pace of the fish similar to the temperature affecting the pace of humans. Homeostasis, in biological terms means that the body is maintaining internal equilibrium to adjust internally and physiologically, in response to the external environmental changes(http://www.buzzle.com/articles/what-is-homeostasis.html). The main function of homeostasis is to keep all the processes of the body stable even if there are variations in the weather and environment outside (http://www.buzzle.com/articles/what-is-homeostasis.html). Regulation of temperature is most definitely the most important aspect of homeostasis. Vocabulary Effectors-are muscles or glands which work in response to the stimulus received from the motor nerves(http://www.tutorvista.com/content/biology/biology-ii/control-and-coordination/receptors-and-effectors.php). Receptors-are structures at the ends of the nerve fibers that collect the information to be conducted by the nerves (http://www.tutorvista.com/content/biology/biology-ii/control-and-coordination/receptors-and-effectors.php). Nares (Nostrils)-the nasal passages (http://dictionary.reference.com/browse/nares). Mouth-the opening in which an animal or human takes in food, liquid, oxygen, etc. (http://dictionary.reference.com/browse/mouth?s=t) Eyes- the organ of sight, in vertebrates typically one of a pair of spherical bodies contained in an orbit of the skull and in humans appearing externally as a dense, white, curved membrane, or sclera, surrounding a circular, colored portion, or iris, that is covered by a clear, curved membrane, or cornea, and in the center of which is an opening, or pupil, through which light passes to the retina.( http://dictionary.reference.com/browse/eyes?s=t) Operculum-the gill cover; a part or organ serving as a lid or cover, as a covering flap on a seed vessel. (http://dictionary.reference.com/browse/operculum?s=t) Lateral Line-the line, or system of lines, of sensory structures along the head and sides of fishes, by which the animal is believed to detect water current and pressure changes and vibrations. (http://dictionary.reference.com/browse/late-ral+line?s=t) Soft Dorsal Fins-the fin or finlike integumentary expansion generally developed on the back of aquatic vertebrates.( http://www.earthlife.net/fish/fins.html) Pectoral Fins-(in fishes) either of a pair of fins usually situated behind the head, one on each side, and corresponding to the forelimbs of higher vertebrates.( http://www.earthlife.net/fish/fins.html) Pelvic Fins-(in fishes) either of a pair of fins on the lower surface of the body, corresponding to the hind limbs of a land vertebrate; ventral fin.( http://www.earthlife.net/fish/fins.html) Gills-the respiratory organ of aquatic animals, as fish, that breathe oxygen dissolved in water.( http://dictionary.reference.com/browse/gills?s=t) Scales-one of the hard, bony or dentinal plates, either flat or denticulate, forming the covering of certain other animals, as fishes.( http://dictionary.reference.com/browse/scales?s=t) Vent-the anal or excretory opening of animals, especially of those below mammals, as birds and reptiles.( http://dictionary.reference.com/browse/vent?o=100074) Peduncle-a stalk or stem; a stalk like part or structure.( http://dictionary.reference.com/browse/peduncle?s=t) Anal Fin- the median, unpaired fin on the ventral margin between the anus and the caudal fin in fishes.( http://dictionary.reference.com/browse/anal+fin?s=t) Two-Chambered Heart-including one atrium and one ventricle.( http://en.wikipedia.org/wiki/Atrium_(heart) Jaws- either of two bones, the mandible or maxilla, forming the framework of the mouth.( http://dictionary.reference.com/browse/jaws?s=ts) Equilibrium-a state of rest or balance due to the equal action of opposing forces. Vertebrates- are animals that have a spine or backbones.( http://dictionary.reference.com/browse/equilibrium?s=t) Cold-blooded- designating or pertaining to animals, as fishes and reptiles, whose blood temperature ranges from the freezing point upward, in accordance with the temperature of the surrounding medium.( http://dictionary.reference.com/browse/cold-blooded?s=t) Ventilation-combination of movement of operculum and the floor of the mouth.( http://www.biology-resources.com/fish-01.html) Question, Hypothesis, Materials, and Procedure Question: Do various temperatures of water effect the way a fish breathe? Hypothesis- Cold water: Cold water will affect the way a fish breathe. A fish will take deeper, slower, and less breathes. Room Temperature Water: The amount of breaths a fish breathes will be normal. Hot water: Hot water will cause the fish to taker deeper breaths that are faster. Fish will inhale and exhale more breathes in hot water. Materials- Two fish Small sized container/fish tank Hot water Cold water Room temperature water Notebook/paper Pen/pencil Thermometer timer Procedure- First, set aside a bowl of water to get it to be room temperature. While that sits, create a table with three rows and eight columns. Label the first row experimental sample. Label the next two rows fish one and fish two. Label the columns room temperature, number of breaths, cold water temperature, breaths, hot water temperature, and breaths. Then, get extremely cold water and pour it into the container/fish bowl. Take the first fish and put it in the container with the cold water. Take the thermometer and put it in the bowl of water; wait till the meter stops moving. Record the temperature of the water. Next, set your timer to sixty seconds. Start the timer and count how many breaths the fish takes until the timer goes off. Record the time. Take the fish and thermometer out of the water and pour the water out. Pour the hot water into the container/fish tank and put the previous fish back into the container. Take the thermometer and sit it in the bowl until the meter stops. Record the temperature. Like before, set the timer to sixty seconds and count how many breaths the fish takes in that time. Record your results. After that, take the fish out along with the thermometer. Empty the container of the water. By this time the water that was set aside should be room temperature. Take that water and empty it into the container/fish tank and put the previous fish and thermometer in the bowl. Record the temperature of the water. Set the timer and count the breaths taken again. Record your results before taking the fish and thermometer out. Pour out the water. Repeat this process with the other fish and new water. Bar Graph and Frequency Table Experimental Sample Room Temperature Number of Breaths Warm Temperature Number of Breaths Cold Temperature Number of Breaths Time Fish #1 22Â ° C 89 27Â ° C 91 25Â ° C 59 60 sec Fish #2 23Â ° C 84 27Â ° C 69 25Â ° C 66 60 sec What is a fish? What is the mechanism in which fish breathe in water? A fish is any cold-blooded vertebrate animal that lives in water (http://www.myuniversalfacts.com/2006/03/how-do-fish-breathe.html). Fish live in nearly any water habitat and can be found in many different varieties of climatic conditions from near-freezing Arctic waters to the hot desert springs. Animals that live on land have a different respiratory system from aquatic animals such as fish. A fish is capable of breathing under water without taking frequent trips to the surface to breathe air unlike a whale which is a marine animal. This is because fish have gills. It is a process to fish breathing. First, water in the fishs surrounding enters its mouth. Water enters the mouth by the operculum and a very effective pumping system that involves the mouth. As a fish pumps water through the gills it opens and closes its mouth. Water is drawn into the mouth after the fish opens its mouth and the operculum closes. After water enters the fishs mouth it passes through a structure. This structure is called gill rakers. The gill rakers act as a filter system by straining out particles such as food or any other foreign particles that may have entered the mouth from the inflow of water. Next, the filtered water travels through the gill arches hence passing over the gills. Projected out into the water flow allows water to flow across the lamellae are gill filaments. Resulting, oxygen and carbon dioxide are exchanged directly across the capillary membrane. As water flows through the gills, the dissolved oxygen passes into blood circulating through the gill structures. The gill structures include the filaments and lamellae. Simultaneously, carbon dioxide which is the waste product, in the fishs bloodstream passes into the water. It is then carried away and out of the body through the operculum. This is the process by which fish breathe also know as respiration. Resources and References http://www.biology-resources.com/fish-01.html http://en.wikipedia.org/wiki/Fish http://www.myuniversalfacts.com/2006/03/how-do-fish-breathe.html http://teachers.guardian.co.uk/Guardian_RootRepository/Saras/ContentPackaging/UploadRepository/learnpremium/Lesson/learnpremium/scienc~00/post16~00/biology/exchan~00/gaseou~01/gaseou~01/breath~00/default.htm http://www.tutorvista.com/content/biology/biology-ii/control-and-coordination/receptors-and-effectors.php http://encyclopedia2.thefreedictionary.com/Two+chambered+heart http://www.dictionary.com http://en.wikipedia.org/wiki/Atrium_(heart http://www.earthlife.net/fish/fins.html

Media Ownership :: essays papers

Media Ownership Ownership of the media by a small handful of companies has created several problems for democracy since it’s existence. Because the media has been such a major source of information for us Americans we must learn to be skeptical of these large corporations and their motives. Commercialism and the lack of diversity of the media are two such problems that have been created due to these large corporations. The main source of money for any media outlet, whether it is CNN or the local newspaper, is from advertisers, not the audiences like you would expect. â€Å"In a survey of 118 news directors around the country, more than half, 53 percent, reported that advertisers pressure them to kill negative stories or run positive ones.† News directors have also reported that outside TV consultants have been brought in to stations to critique their newscasts and improve ratings by often issuing blanket edicts about what should and should not be covered in doer to attract the most advertising dollars. (Just, 1) This fact now being known makes us aware that the media is often swayed from criticism of the products or mistakes of the corporations that give them this money. Important defects or corporate issues that we need to know about have possibly gone unannounced due to the fear of losing sponsors and profit. The only way to guarantee diversity of opinion in the media is to have diverse ownership over it. The airwaves are a limited resource with a few channels still remaining. The Federal Communications Act says that the airwaves belong to the public, which has somehow has gone ignored over the years. Having been exposed to a less diverse range of ideas over the past few decades has left us assuming that what we see and hear in the media is all that there is out there. This is obviously no way to maintain an active marketplace of diverse ideas and opinions. This is defiantly no way to keep a true democracy. (Bagdikian, 2-3) As you can see the corporate ownership of the media has become a problem to our existing democracy. Not only has the media become extremely commercialized it has also taken away the diversity that we need to make an honest judgment about something of importance to us.

Ancient Greek Musical Instruments

Lyra: originally called Chelys, because of the tortoise shell used as its sound box. According to Nicomachus of Gerasa (Ist cent. AD), the tortoise-shell Lyra was invented by god Hermes, who gave it to Orpheus. â€Å"Orpheus taught Thamyris and Linos, and Linos taught Hercules. When Orpheus was killed by the Thracian women, his lyra was thrown into the sea, and washed ashore at Antissa, a city of Lesbos, where it was found by fishermen, who brought it to Terpander, who in turn carried it to Egypt and presented it to the Egyptian priests as his own creation. We don't know how many strings the original Lyras had. By the time of Terpander (8th-7th cent. BC) Lyra was a seven stringed instrument and from many ancient sources we know that this type remained in use for a long time during the classical period. The addition of an eighth string in the 6th century BC is credited by Nicomachus of Gerasa to Pythagoras. By the fifth century there were Lyras with anything from 9 to 12 strings. The strings (neura) were made of animal gut of sinew, but there are also references of strings made of linen or hemp.Lyra was mainly used for the musical education of the young, and by amateur players in general. Cithara plucked instrument with 5 strings originally, but later with as many as 12 strings. Cithara was bigger than the Lyra and it was the principal concert instrument played by professional musicians, the citharodes. According to Plutarch, cithara was designed by Cepion, a student of Terpander. Many instrument names like guitar, cittern, zither etc. derive from the word cithara. Barbitos or Barbiton is an instrument of the Lyra family and resembles a Lyra, but it has longer arms and narrower sound box.Musicians of the School of Lesbos, like Alcaeus and Sappho, are frequently depicted in vases playing the Barbitos. Phorminx probably the oldest of the Cithara type instruments. From references in ancient sources (Homer, Hesiod, Aristophanes) we know that Phorminx was richly dec orated with gold and ivory, and accompanied the singing of the epic singers called rhapsodes. Epigonion belongs to the psaltery family and it is the instrument with the largest number of strings, sometimes as many as forty (Polydeuces).It may owe its name to the fact that it was played ‘on the knee' – Greek ‘epi gonu', or maybe because its inventor was someone named Epigonus. Pandouris or pandourion, also called trichord because it had three strings, is the first fretted instrument known, forerunner of the various families of lutes worldwide. Source of our knowledge about this instrument is the Mantineia marble (4th cent BC, now exhibited at Athens Archaeological Museum) depicting the mythical contest between Apollo and Marsyas, where Pandouris is being played by a muse seated on a rock.

Apa Snippets and Style Writing Pointers to Help Tcl Nursing

APA Snippets and Style Writing Pointers to Help TCL Nursing Students Write Excellent Papers Datatel Number Technical College of the Lowcountry Course Number Abstract All papers should have an abstract. An abstract is a brief, comprehensive summary of the contents of the paper, including the purpose and major findings. The abstract should be well organized, concise and specific. The abstract should be one paragraph of no more than 120 words on a page by itself. Other features of an abstract include double-spacing, one inch margins without indentation, and Times Roman or Courier 12 font.APA Snippets and Style Writing Pointers to Help TCL Nursing Students Write Excellent Papers The aim of this article is to discuss the varieties of pain assessments, and to determine under which circumstances each assessment is most appropriate. Pain is rated differently by each patient, and is subjective to many factors in the patient's life, including but not limited to culture and past experiences wit h pain. Since pain may have an effect on all aspects of a patient's life, healthcare providers must strive to most properly identify the amount of pain in order to properly control it.Symptoms such as â€Å"crying, elected temperature, facial grimacing, groaning, moaning, guarding of the affected area, loss of sleep, nausea, vomiting, restlessness, rise in blood pressure, rise in respiratory rate, and tachycardia† are typical indicators that a patient is in pain; but how much pain? Healthcare providers, namely nurses, use a system of scales and work with the patient to rate their pain. Nurses must be aware of the different pain rating scales available in order to most accurately assess a patient's pain level.A nurse must not only be able to determine which pain scale is most appropriate for the patient to identify and express his or her pain level, but also be able to carefully interpret and evaluate the scores. For example, the pain scale that is appropriate for a fully func tioning adult will differ from one that is appropriate for a child and differ from one that is appropriate for a patient affected by dementia, etc. A variety of unidimensional scales quantify the intensity of the pain and are more simple; while multidimensional scales do so plus identify the pain quality, uration, and any relieving factors, and are more complex. If time permits, a nurse may choose to use a combination of pain assessments in order to be as thorough as possible. Nurses can implement the use of a variety of pain assessments reviewed in this article into their patient's shift assessment. A nurse may choose to use a more complex, thorough multidimensional scale upon his or her patient's admission assessment, and then use a more simple, quick unidimensional scale upon his or her patient's regularly scheduled shift assessments.Regardless of the type of scale being used, a nurse must always use â€Å"effective and sensitive communication with the patient to assist in expre ssions of pain. † Nurses must listen to their patient and accurately document their patient's subjective descriptions of the pain. Also, nurses should allow their patients ample amount of time to respond to their questions, which should also be open-ended questions. After the doctor has reviewed the pain assessment and ordered meds, the â€Å"effects of analgesia should be monitored closely and recorded in nursing notes to maintain continuity of patient care. In conclusion, nurses should assess the patient's abilities, then choose and tailor the pain assessment to the patient's needs. Assessments are of immeasurable importance as they have a direct effect on the patient's quality of life. The more extensive of knowledge a nurse has of the plethora of pain assessments to choose from, the more he or she can also select the most appropriate pain scale per the patient, which in turn will have the greatest impact on the patient's progress. Resources In the text, cite resources use d to prepare the paper.Cite references in parentheses at the end of the sentence, but before the period (Burckhalter, 2009). Give the author's last name, a comma, and year of publication. When citing the same resource several times in the same paragraph, it is necessary to cite the author every time but the year only once (Burckhalter). Cite a page number only for quotes. For works by two authors, name both every time and use an ampersand (Merwin & Sapp, 2008). For works with three to five authors, name all in the first citation (Bible, Simmons, & Beasley, 2009). In later citations, cite only the first author's name and the term et al. nd the year. For works of six or more authors, cite only the first author's surname followed by et al. and year in the text, but identify all the authors in the reference list (Slyh et. al, 2007). When a group or organization is the author, cite the group's name followed by the year (TCL Nursing Faculty, 2008). References Cite all resources used in th e text. For the reference list, center the word â€Å"References† at the top of the last page. Double space the entries and indent all lines, except the first line of each entry, five to seven spaces. Alphabetize the list by the authors’ surnames.Include only the initials and last name of authors, not full names or professional initials. Examples of citations are in the sample reference list with this paper. Note the examples of punctuation and capitalization. Journal citations capitalize only the first word of the article title. All major words in the title of the journal are capitalized. The name of the journal and the journal volume are italicized, but the issue and page numbers are not italicized. For books, the reference citation begins with the author or authors, followed by the date of publication. Only the first word of a book title is capitalized.Book titles are italicized. The publisher’s location is cited by city and state, a colon, and the name of th e publisher. Electronic citations use the same guidelines indicated above. Do not place a period at the end of an electronic address. Email sent from one to another should be cited as personal communication and is not included in the reference list. Information from classroom lectures are also personal communication (S. Beasley, April 14, 2009). Conclusion A paper should have a conclusion which restates the purpose of the paper, states the major points, and gives recommendations for practice and/or research.This paper has presented suggestions for helping TCL nursing students write excellent papers. A student may also consider using this document as a foundation for a paper. The margins are set correctly. References American Psychological Association. (2009). Publication manual of the American Psychological Association (6th ed. ). Washington, DC: Author. Author, C. K. (2007, September 30). Title of a journal article. Imprint, 21, 35-40. Retrieved from Academic Search Premier databas e. Benton Foundation. (1998, July 7). Barriers to closing the gap. In Losing ground bit by bit: Low-income communities in the information age (chap. ). Retrieved from HYPERLINK â€Å"http://www. Benton. org/Library/Low-Income/two. html† http://www. Benton. org/Library/Low-Income/two. html Bible, C. M. , Simmons, A. W. , & Beasley, S. G. (2009). Summer events at TCL. Journal of Nursing Education, 46(8), 89-96. Burckhalter, T. S. (February 2009). Beaufort’s best nursing students. Nurse Educator, 53, 46-65. McPheron, S. (2009). Mapping families. Imprint, 23(4), 14-27. Merwin, D. M. & Sapp, M. P. (2008). Where to find happiness. Journal of Divine Meditation, 38(5), 35-42. Simmons, A. (2007). Frustrations in nursing education.In M. Sapp (Ed. ), Success for nursing students (pp. 13-29). Beaufort, SC: Technical College of the Lowcountry. Slyh, K. P, Merwin, D. M. , Sapp, M. L. , Bible, C. W. , Slachta, P. A. , & Simmons, A. W. (2007). What nursing students want. Journal of Am erican Community Colleges, 26(3), 32-46. Nursing Faculty. Technical College of the Lowcountry nursing student handbook (2008). Beaufort, SC: Author. Thomas, C. L. (Ed. ). (2008). Taber's cyclopedic medical dictionary (21st ed. ). Philadelphia: F. A. Davis. APA SNIPPETS AND STYLE WRITING PAGE * MERGEFORMAT 7 PAGE

Kangaroo Facts

Kangaroo Facts Kangaroos are marsupials that are indigenous to the Australian continent. Their scientific name, Macropus, is derived from two Greek words meaning long foot (makros pous). Their most distinctive characteristics are their large hind legs, long feet, and large tail. Kangaroos are unique in that they are the only animals of their size that use hopping as their primary means of movement. Fast Facts: Kangaroo Scientific Name: MacropusCommon Names: Kangaroo, RooOrder: DiprotodontiaBasic Animal Group: MammalsDistinguishing Characteristics: Large hind legs, long feet, large tail and pouch (females)Size: 3 - 7 feet in heightWeight: 50 - 200 poundsLife Span: 8 - 23 yearsDiet: HerbivoreHabitat: Forests, plains, savannas, and woodlands in Australia and TasmaniaPopulation: Approximately 40 - 50 millionConservation Status: Least concernFun Fact: Like camels, kangaroos may go for periods of time without drinking water. Description Kangaroos are best known for their powerful hind legs, their large feet, and their long powerful tails. They use their legs and feet to hop around, which is their basic means of locomotion, and their tails for balance. Like other marsupials, females have a permanent pouch for raising their young.  A kangaroos pouch is technically called a marsupium and it performs a number of functions. The female kangaroos breasts, which she uses to nurse her young, are inside her pouch. The pouch also functions similarly to an incubator to allow a joey (baby) to fully develop. Lastly, the pouch has a safety function in that it helps to protect the females young from predators.   Kangaroos are usually between 3 to 7 feet in height. They can weigh up to approximately 200 pounds. Other physical characteristics of kangaroos are their relatively small heads with their large, round ears. Due to their hopping ability, they can leap over long distances. Some males may leap to almost 30 feet in one leap. Eastern Grey Kangaroo, Murramarang National park, New South Wales, Australia.   J and C Sohns/Getty Images Plus Habitat and Distribution Kangaroos live in Australia, Tasmania, and surrounding islands in a variety of habitats such as forests, woodlands, plains, and savannas. Depending on the species, kangaroos occupy different niches in the ecosystem. Diet and Behavior Kangaroos are herbivores and their diet consists mainly of a variety of plants such as grasses, shrubs and flowers. Some species may also eat fungi and moss. Kangaroos live in groups called mobs, also known as troops or herds. These mobs are usually headed by the dominant male in the group.   Similar to cows, kangaroos may regurgitate their food to chew it as cud and then swallow once more. This behavior is much rarer in kangaroos than in ruminant animals. Kangaroo stomachs differ from those of cows and similar animals; while both kangaroos and cows have chambered stomachs, the fermentation process in their respective stomachs is different. Unlike cows, the process in kangaroos doesnt produce as much methane, so kangaroos dont contribute as much to methane emissions globally as cows. Kangaroos are usually active at night and in the early morning hours, but their overall activity pattern is varied. Their rest periods are restricted almost exclusively to a diurnal (during the day) pattern. Similar to camels, they may go for periods of time without drinking water due to their relative inactivity during the day when it is hotter. Since their diet consists of plants, their water needs can be largely satisfied by the water content present in the plants that they eat. Reproduction and Offspring Eastern Grey Kangaroo with Joey in Pouch.   Gary Lewis/Photolibrary/Getty Images Plus Kangaroos have a varied breeding season. Reproduction takes place all year long, but the Australian summer months of December to February are the most common. Male kangaroos may flex their muscles to attract females and can fight for the right to breed with females. Females usually produce one baby kangaroo, called a joey. After becoming impregnated, a kangaroo will have her baby after a gestation period of a little longer than a month (approximately 36 days). The baby joey weighs about .03 of an ounce and is less than one inch in length when born, about the size of a grape. After birth, the joey will use its forelimbs to travel through its mothers fur to her pouch, where it will remain for the first few months of its life. After five to nine months, depending on the species, the joey will typically leave the pouch for brief periods of time. After about nine to eleven months, the joey will leave its mothers pouch for good. Females can enter heat after giving birth, so they may become pregnant while a joey is still nursing in her pouch. The developing baby will enter a dormant state that coincides with their older sibling leaving the mothers pouch. When the older sibling leaves the pouch, the mothers body will send hormonal signals to the developing baby so that it will resume its development. A similar process occurs if the mother is pregnant and the older joey dies in her pouch. Conservation Status Kangaroos are designated as least concern by the International Union for Conservation of Nature (IUCN). Their population is very abundant and by most estimates, there are more kangaroos in Australia than people. Estimates range from a population of 40 to 50 million kangaroos, which continues to increase. Humans are the main threat to kangaroos since they are hunted for both their meat and their hides. Humans can also contribute to the loss of kangaroo habitat due to land clearing for development. Predator threats include dingos and foxes. Kangaroos use their teeth, claws, and strong hind legs as defense mechanisms against such predators. Species There are four major species of kangaroos. The red kangaroo (Macropus rufus) is the largest. Males of the species have red/brown fur. Other species include the eastern grey kangaroo (Macropus giganteus), the western grey kangaroo (Macropus fuliginosus), and the antilopine kangaroo (Macropus antilopinus). The eastern grey kangaroo is the second largest species and is known as the great grey species, while the western grey kangaroo is also known as the black-faced kangaroo due to its distinctive facial coloring. The antilopines name means antelope-like and they are found in northern Australia. Some scientists consider there to be six species of kangaroo, including two species of wallaroo (Macropus robustus and Macropus bernardus). Wallaroos are considered to be closely related to both wallabies and kangaroos. Herd of kangaroos at twilight (Coombabah Lake, QLD, Australia).    Kangaroos and Humans Humans and kangaroos have a long and varied interaction pattern with one another. Humans have long used kangaroos for food, clothing, and some types of shelter. Due to their increasing numbers, kangaroos can be viewed as pests, particularly by farmers when kangaroos compete for grazing land. Kangaroos are often present in grasslands and areas that are typical farmland so resource competition may take place. Kangaroos are not typically aggressive when grazing. The situation of farmers seeing kangaroos as pests is similar to how many in the United States may see deer as pests. Sources Britannica, The Editors of Encyclopaedia. Kangaroo. Encyclopà ¦dia Britannica, Encyclopà ¦dia Britannica, Inc., 11 Oct. 2018, www.britannica.com/animal/kangaroo.â€Å"Kangaroo Facts!† National Geographic Kids, 23 Feb. 2017, www.natgeokids.com/uk/discover/animals/general-animals/kangaroo-facts/.â€Å"Kangaroo Mob.† PBS, Public Broadcasting Service, 21 Oct. 2014, www.pbs.org/wnet/nature/kangaroo-mob-kangaroo-fact-sheet/7444/.â€Å"Kangaroo Reproduction.† Kangaroo Facts and Information, www.kangarooworlds.com/kangaroo-reproduction/.

Free Essays on Importance Of Higher Education

Importance of a Higher Education Some people say that the world has many opportunities; some say that you can’t get anywhere unless you are born to some certain class of people. Some even say that it is pure fate that brings you where you are going to be and what you get is what you get and you can’t do anything about it. I think that people decide their own fates and it doesn’t matter who was your parents or how much money you have. I think that your education is the most important thing that you can have in life it can bring you many things like; advancement, family, stability, a career, and of course knowledge. In many countries your job is already decided when you are born because of what your parent does for a living and their stature in society. That is many people say that the United States is the land of opportunity, you can do what ever you want with your life as long as you earn it and have the right qualifications. You can decide weather you want to continue after high school and education or get a minimum wage job. Many people take that right for granted and they put off college until they after they have a family and get settled with out knowing that their family will take up the rest of their lives. In fact, in 1999, only 66 percent of people ages 24-29 obtained a bachelors degree or higher, found on www.nces.ed.gov. People who are from other countries who move to take advantage of this right we take for granted understand the purpose of a higher education. Advancement is inevitable no matter what you do you will have to be going forward in some way. Weather your advancement is to a new position in your job or a whole knew career, even if all you are doing is going to the next day you are advancing. I think that if you want to decide where you are going to advance, you have to have a good education. If you don’t have a good education you are going to play life like that lottery, you may go to a better job whe... Free Essays on Importance Of Higher Education Free Essays on Importance Of Higher Education Importance of a Higher Education Some people say that the world has many opportunities; some say that you can’t get anywhere unless you are born to some certain class of people. Some even say that it is pure fate that brings you where you are going to be and what you get is what you get and you can’t do anything about it. I think that people decide their own fates and it doesn’t matter who was your parents or how much money you have. I think that your education is the most important thing that you can have in life it can bring you many things like; advancement, family, stability, a career, and of course knowledge. In many countries your job is already decided when you are born because of what your parent does for a living and their stature in society. That is many people say that the United States is the land of opportunity, you can do what ever you want with your life as long as you earn it and have the right qualifications. You can decide weather you want to continue after high school and education or get a minimum wage job. Many people take that right for granted and they put off college until they after they have a family and get settled with out knowing that their family will take up the rest of their lives. In fact, in 1999, only 66 percent of people ages 24-29 obtained a bachelors degree or higher, found on www.nces.ed.gov. People who are from other countries who move to take advantage of this right we take for granted understand the purpose of a higher education. Advancement is inevitable no matter what you do you will have to be going forward in some way. Weather your advancement is to a new position in your job or a whole knew career, even if all you are doing is going to the next day you are advancing. I think that if you want to decide where you are going to advance, you have to have a good education. If you don’t have a good education you are going to play life like that lottery, you may go to a better job whe...

Bicycle Propulsion Systems

Bicycle Propulsion Systems    1.Abstract This report documents the development of bicycle propulsion systems over time and mentions the changes made to make the bicycle more efficient, safe, faster and resistant. It defines what a bicycle’s drivetrain system is in a few words and what they are used for on a bicycle. It includes brief information about 4 of the first bicycles made in the 1800s and refers to the changes in design and materials used for these bicycles. It also consists information of the 2 main bicycles used today and the improvements they have had compared to the older bicycles. At last, this report recommends improvements that could be made to the bicycle to make it more efficient. 3.Nomenclature Km/h = kilometers per hour Kg = kilograms Torque = a force that causes rotation Cadence = the number of revolutions of the crank per minute 4.Introduction Public transportation has changed and improved over a great period of time. These improvements have helped make transp ortation ,from one location to another, much easier. The bicycle is a great example of a method of transportation that has gone through a lot of improvements so that it is easier to use, faster, safer and more damage resistant. All this has happened by engineers taking into consideration the materials they use and the design of the bicycle. 5.Discussion and Analysis of Material 5.1 Bicycle Drivetrain Systems (Appendix 1 and 2) Bicycle Drivetrain Systems are used to transmit the rider’s power to the drive wheels in order to move the bicycle forward. Nowadays, most drivetrain systems include mechanisms that are used to convert speed and torque via gear ratios. Over the years propulsion systems for the bicycle have ranged from the rider’s legs, to the modern drivetrain systems that include gears and pedals. 5.2 History (Appendix 3) Over the past couple of centuries many different bicycles have been invented that have different characteristics in order to improve safety and efficiency, but still had a similar structure. Many of the different developed bicycles include: Hobby Horse (Appendix 4) The Hobby Horse was invented in 1817, by the German inventor, Baron Karl Drais. This bicycle had a primitive design and did not include a drivetrain. It was a 23kg bicycle which was made out of wood, including the wheels. It also included a leather saddle for the rider to sit on, and resembled a modern handlebar. The rider’s feet was the propulsion system for this bicycle. This meant that the rider wouldn’t be able to go very fast and would require a great amount of effort to move it forward due to its weight. It would also be difficult to transfer the bicycle uphill, thus the rider would have to carry it. Whilst going downhill, the lack of brakes would cause the bicycle to travel at a fast speed without anything, other than the rider’s feet, to stop it. Velocipede (Appendix 5) The Velocipede was invented in 1858 by the Fr ench Michaux company. This bicycle was a great development from the Hobby Horse. It first had a cast iron frame which was then changed to wrought iron for better damage resistance. The seat featured suspension which was inspired by the suspension used in wagons. Although, the bicycle was not comfortable to ride, hence why it’s also called the â€Å"Boneshaker†. The wheels were wooden but consisted of iron tyres. It also included pedals on the axle of the front wheel as the bicycle’s propulsion system. The pedals would allow the rider to use less effort, compared to the Hobby Horse, to move the bicycle forward. This bicycle also consists of the introduction of a first brake, which included a metal lever that pressed a wooden pad against the rear wheel, making it much safer as it has the capability of stopping, though the wooden pad would wear out due to the friction between the pad and the wheel. Penny Farthing (Appendix 6) The Penny Farthing was invented in 1869 by French, Eugene Meyer. The bicycle’s design was based on the desire to make it faster, thus using it for sport. Since gears were not invented yet, the front wheel’s size was increased so it would travel a longer distance after one full rotation. The frame weight was reduced to increase riding comfort including solid rubber tires, and the use of hollow steel tubes made it lighter. With the introduction of spokes and ball bearings, the wheels were also improved. The Penny Farthing would reach top speeds of 40km/h, but despite its advantages it had many disadvantages. It required a running start and a mounting step for riders to be able to mount it. To stop, the rider would require to jump off the bike. The higher centre of gravity on the bicycle would mean that if the rider fell they would have great accident. And at last, if the rider went over a bump they would be sent flying, leading to a fatal accident. The Penny Farthing’s propulsion system were stil l the pedals, although, their positioning on the bigger front wheel would require riders with tall legs to ride them. Due to the bigger wheel, one rotation of the pedals would allow the bicycle to cover a longer distance, hence why it is faster than previous bicycles. This design might my the bicycle faster and more efficient, but it was more dangerous due to the height and centre of gravity of the bike, the lack of feasible brakes and the high speeds it can reach. The Rover (Appendix 7) The Rover was invented in 1885 by English John Kemp Starley. This bicycle was chain driven and was also known as the â€Å"Safety Bicycle†. It featured equal sized wheels and a diamond frame, used to equally distribute the forces throughout the bicycle’s frame, though it still lacked a seat tube. The solid rubber tires were also replaced in 1888 with pneumatic tires, which made it more comfortable to ride. The original model of The Rover used treadles to turn the rear wheels, but t he later updated model used a chain drive which consisted of a large front sprocket and a small rear sprocket used to multiply the revolutions of the pedals without the need of a large front wheel. The pedals were more centred putting the rider’s feet away from the front wheel, and the centre of gravity was lower making it easier for the rider to stop by putting their feet on the ground. To also better stop the bicycle, it included a lever which pushes a metal pad onto the front wheel. This bicycle was much safer due to its frame design and its low centre of gravity. It had increased efficiency due to the positioning of the pedals and the two same sized wheels whilst still being capable of travelling at high speeds with the brake being able to stop the bicycle if needed. The design of the handlebar also helped to improve the handling of the bicycle. The use of metal on the frame and on the chain mechanism also made it resistant from damage. Although, with the introduction o f the new chain mechanism, pebbles or sticks could get caught in the chain, possibly damaging the mechanism. 5.3 The modern bicycles Today there is a variety of bicycles that are used for different situations. To be able to adapt to the different situations, the bicycles have different characteristics but still have similarities structure-wise. The 2 main types are mountain bikes and racing bikes. Mountain Bikes (Appendix 8) Mountain bikes are bicycles designed for off-road riding. They are similar to other bikes but consist features that help enhance performance and durability on rough terrain. They consist of suspension on the frame and fork making the ride on rough terrain more comfortable, knobby tires which adds more grip on the wheels, heavy duty wheels that add durability, and more powerful brakes to help stop the bike instantly when on the rough terrain. The bicycle’s propulsion system includes derailleur gears (Appendix 2) that consists of a crankset for th e rotation of the bicycle’s pedals, a cogset which is a set of different sized metal cogs or sprockets that are used as the gears, and a chain that links the cogset with the crankset. Different gears provide different torque and speed and requires different amounts of effort to rotate the pedals. The higher the gear, the more torque, speed and effort. The gears are controlled by a shifter which is connected to the gearing gearing mechanism by a cable. Mountain bikes tend to have up to 30 gears, yet mountain bikers choose to use 10 or 9 speed bikes due to the lighter weight and less complexity. The mountain bikes are very efficient and safe bicycle as they include disk brakes that help with instantaneous stopping, a gearing system that helps reduce the amount of effort the rider will have to use and is adaptable to different types of roads, and suspension that provides comfort. Racing Bike (Appendix 9) Racing bikes are designed for competitive road cycling. Its main char acteristics are its light weight for higher speeds, and its stiffness due to the lack of suspension also to achieve high speeds with the sacrifice of comfort. The handlebars are designed and positioned lower than the saddle so that the rider has a more aerodynamic posture. The front and back wheels are positioned close together to allow for quick handling. For the propulsion system the bicycle uses a derailleur system similar to the Mountain Bike. The gear ratios have close spacing so that the rider can pedal at the optimum cadence. To shift gears the bicycle consists of an electronic shifting system. The switch is connected wired or wirelessly to a battery pack and to a small electric motor that is used to drive the derailleur, moving the chain between the cogs. This improvement allows for the rider to switch gears faster. The Racing Bike is quite efficient in terms of speed, and quite safe as it includes disk brakes that stop the bike instantly with the exception of knobby whe els as it would decrease the speed of the bike. The materials manufactures use for the frame e.g. Carbon fibre, cause the bike to be light in weight and capable of travelling at faster speeds. 6.Conclusions There have been many major developments in public transport over the years, with the bicycle as a great example. Many improvements have been made to the bicycle and the methods it uses for the rider to move it forwards. The introduction of new drivetrain systems and the vast use of different materials according to their properties are the cause of these improvements. The invention of, more complex, propulsion and brake systems have helped improve the efficiency and safety of the bicycle and the implementation of stronger and lighter materials has increased the bicycle’s damage resistance and has made it capable of reaching higher speeds (Appendix 10) with less effort required by the rider. Also improvements on the seat and the suspension on the bicycle have contributed to make it a more comfortable method of transportation. 7.Recommendations The bicycle has had great developments over the years, though more improvements can be made in order to make the bicycle safer, faster and more efficient. Such improvements may include: Adding a cover, made of a light plastic, for the gearing system so that nothing can get caught in the mechanism, running the brake lines through the frame of the bicycle so there aren’t any cords hanging, adding a cogset to the front wheel making it a 2-wheel drive thus making it faster. 8.References Crazyguyonabike April 15, 2009, The Hobby Horse: 1817 – Karl Drais and his running machine. https://www.crazyguyonabike.com/doc/page/?page_id=40616 , (accessed 1/3/2017) Crazyguyonabike May 2, 2007, The Boneshaker: 1867 – Pierre Lallement, the Michaux family and their velocipede. https://www.crazyguyonabike.com/doc/page/?page_id=40617 , (accessed 1/3/2017) Crazyguyonabike July 2, 2007, The P enny Farthing: 1878 – James Starley and his ordinaries . https://www.crazyguyonabike.com/doc/page/?page_id=40618 , (accessed 1/3/2017) Crazyguyonabike March 27, 2009, The Rover: 1885 – The modern bicycle born in England. https://www.crazyguyonabike.com/doc/page/?o=tS&page_id=40621&v=9Y , (accessed 1/3/2017) Wikipedia January 6, 2017, Racing Bicycle. https://en.wikipedia.org/wiki/Racing_bicycle , (accessed 2/3/2017) Wikipedia February 23, 2017, Mountain bike. https://en.wikipedia.org/wiki/Mountain_bike , (accessed 2/3/2017) 9.Appendices Appendix 1 Appendix 2 Appendix 3 Appendix 4 Appendix 5 Appendix 6 Appendix 7 Appendix 8 Appendix 9 Appendix 10

Gender inequalities within the NHS Essay Example | Topics and Well Written Essays - 1000 words - 1

Gender inequalities within the NHS - Essay Example Since its inception in 1948, it has improvised its policies and has incorporated better and newer policies for effective functioning. It is a humongous effort to run the NHS smoothly and efficiently as it has innumerable people involved in its administration and operation. It has gone a step ahead and has integrated computers for better functioning and also has its helpline on the internet. Amidst all these progressive steps, the main factor that remains important for it being effectual is its colossal staff. The UK government has ensured that almost all doctors and nurses in the UK are employed by the NHS and work in their hospitals. The government has also ensured that all the new student doctors train at the NHS after completing medical school and they have provision to accommodate almost 8000 doctors and nurses every year. These new doctors must undergo a two year foundation programme with the NHS to become registered doctors. NHS plays a very critical role in shaping the careers for new doctors and nurses. NHS has employment policies that promote equality and diversity within the organization and are non-discriminatory about race, caste and gender and disability (Department of Health, 2006). The Gender Equality Act of 2006 has made provisions for the following: equal opportunities for men and women in terms of employment, no sexual discrimination towards the transsexuals, no pay gap between male and female employees, part time work options and to provide training and up gradation of knowledge and skills. It has been acknowledged by most that there is predominance of women in the nursing field especially those working part-time. There is however, a deliberation that the women nurses are at the lower stratum of the profession, which questions the Equality policy. Studies are showing that female nurses are receiving disproportionate employment opportunities with most of

Project Management Essay Example | Topics and Well Written Essays - 1500 words - 15

Project Management - Essay Example Key project obstacles include scope, quality, budget, and time. Other secondary obstacle would include more ambitious challenges like fairly allocating the necessary inputs and integrating them in order to achieve the set objectives and goals. There are various ways of approaching project management activities. Regardless of the methodology employed; project managers should put a lot of considerations on the overall project objective, time, cost, and also the responsibilities and duties to be played by members and stakeholders in the project. PRINCE2 and Agile project management methodology are examples of the methodologies available for project managers (Keith 2010). PRINCE2 is a well-structured approach used in project management. It combines the original PROMPT methodology with IMB’s MITP methodology. PROMPT methodology had earlier evolved into the present day PRINCE2 methodology. PRINCE2 offers a platform for project management with clearly spelt out structure. It was developed by the United Kingdom government Office of Government Commerce (OGC). The United Kingdom expensively uses this methodology in its management duties of public projects in the country. PRINCE2 encompasses the control, organization and management of a given project. It puts a lot of focus on not only definition of products but also their delivery, especially the quality requirements (Gerard 2008). Because of this, it defines a successful project as being output oriented but not activity or action oriented. This is through creating products agreed upon as well as defining the intended scope of the project. It also helps provide a platform for control and planning. Project chiefs would be able to coordinate the project participants. Additionally, they will be able to know how to supervise and design product delivery and what to do if the project fails to meet the originally set goals. In the PRINCE2 methodology, all the different processes involved are clearly specified with

Case study Example | Topics and Well Written Essays - 250 words - 137

Case Study Example Also, it can be attributed to enhanced morale of employees. Q3. The major changes in the situation revolved around the management system of the company. Before, the process of assembling garments involved numerous sub-assembly units before completion. The new system places the entire production of garments in the hands of every employee. In the new scheme, the workers control the entire assembly of garments while the management still make strategic decisions regarding production and also supply workers with essential materials for the production process. Q4. Suppose the new change was aborted and workers went back to the old system, the morale of the workers would slump to its all time low as they would be so demoralized because of the failure and also going back to a system that seemed to lower their work enthusiasm. Also, the percentage of controllable rejects would increase because the old system placed no direct responsibility for the reject on workers. Absenteeism would once again plague the company and the overall productivity of the company would decline

Global supply chain analysis of P&G in the UK Essay

Global supply chain analysis of P&G in the UK - Essay Example This has been one of the fundamental mantras behind the company’s endeavour to implement the model ‘consumer is boss.’ The most circulated brand manufactured by P&G includes Pampers, Gillette, Tide, Ariel, Pantene and Head and Shoulders (P&G, 2011a). P&G has enjoyed a considerable amount of success through its extensive reach all over the world. However, the one country that stands ahead in this race is the United Kingdom. P&G’s business expansion in the UK has proven to be one of the most profitable decisions made by the management. The company has successfully established a strong supply chain network in this part of the world which has made raw materials delivery, distribution and processing very convenient for the company (Fawcett, Jones and Fawcett, 2012). The effective supply chain management strategies employed by the management has made it possible for them to reach out to the customers easily. It is with regards to this fact that the researcher has attempted to conduct a thorough analysis of the supply chain network of P&G in the UK. The study will also include an in-depth explanation of the company’s endeavours to establish a green supply chain process that is aimed towards improving environmental conditi ons. P&G, UK’s supply chain has always been a very integral part of their business. The management responsible for handling operations in the UK always believes in keeping its supply chain networks absolutely shopper centric just like every other part of their business. Serving the needs of the customers has always been amongst the top priorities of the management and they have always emphasized on establishing end to end collaboration with their retail partners in order to achieve this objective (P&G, 2011a). P&G UK has been largely successful in transforming its supply chain network through the application of agent based model. Following the transformation

Sustainable Stakeholder Capitalism Essay Example | Topics and Well Written Essays - 500 words - 1

Sustainable Stakeholder Capitalism - Essay Example In this regard, many others lost their jobs, as their employers were not able to sustain the labor force. Surprisingly, there was a ray of hope in this crisis as other investors saw this as an opportunity to maximize on their potential. It brought to light the idea of conventional capitalism, credit risking financially and educative management of economic prosperity towards sustainable stakeholder capitalist. Subsequently, this paper will give an elaborate on the model of sustainable stakeholder capitalism applied by discussing the three main factors that contributed to the unethical economic surroundings of the global crisis. Further, it will highlight the three steps that responsible business pace setters need to incorporate into their function in order to improve on an acceptable economic environment for the conduction of businesses in future. The implementation of alternate education management system solely depends on three factors. First, the immensity of the pain inflicted on the key stakeholders within the applied management system that relies on business assumptions would be the first factor. Here, the duration at which the pain inflicted on them lasts shall factor in. In addition, the prolonged suffering brought about by the crisis accords the business leaders the rights to not only criticize the managerial conventional systems but also to propose a model that will suit them. The second factor would be the economic balance globally and continued use of the opted model. The model approach was to be one that had the interests of everyone in mind for it to be effective when implemented. Thirdly, the moral aspect of the model opted for was to be a universally accepted approach. Sustainable stakeholder capitalism (SSC) was one of the ways of implementing the alternate education mode (Petrick 105). It incorporated update d scientific approaches to the

Case study Example | Topics and Well Written Essays - 250 words - 137

Case Study Example Also, it can be attributed to enhanced morale of employees. Q3. The major changes in the situation revolved around the management system of the company. Before, the process of assembling garments involved numerous sub-assembly units before completion. The new system places the entire production of garments in the hands of every employee. In the new scheme, the workers control the entire assembly of garments while the management still make strategic decisions regarding production and also supply workers with essential materials for the production process. Q4. Suppose the new change was aborted and workers went back to the old system, the morale of the workers would slump to its all time low as they would be so demoralized because of the failure and also going back to a system that seemed to lower their work enthusiasm. Also, the percentage of controllable rejects would increase because the old system placed no direct responsibility for the reject on workers. Absenteeism would once again plague the company and the overall productivity of the company would decline

Sustainable Stakeholder Capitalism Essay Example | Topics and Well Written Essays - 500 words - 1

Sustainable Stakeholder Capitalism - Essay Example In this regard, many others lost their jobs, as their employers were not able to sustain the labor force. Surprisingly, there was a ray of hope in this crisis as other investors saw this as an opportunity to maximize on their potential. It brought to light the idea of conventional capitalism, credit risking financially and educative management of economic prosperity towards sustainable stakeholder capitalist. Subsequently, this paper will give an elaborate on the model of sustainable stakeholder capitalism applied by discussing the three main factors that contributed to the unethical economic surroundings of the global crisis. Further, it will highlight the three steps that responsible business pace setters need to incorporate into their function in order to improve on an acceptable economic environment for the conduction of businesses in future. The implementation of alternate education management system solely depends on three factors. First, the immensity of the pain inflicted on the key stakeholders within the applied management system that relies on business assumptions would be the first factor. Here, the duration at which the pain inflicted on them lasts shall factor in. In addition, the prolonged suffering brought about by the crisis accords the business leaders the rights to not only criticize the managerial conventional systems but also to propose a model that will suit them. The second factor would be the economic balance globally and continued use of the opted model. The model approach was to be one that had the interests of everyone in mind for it to be effective when implemented. Thirdly, the moral aspect of the model opted for was to be a universally accepted approach. Sustainable stakeholder capitalism (SSC) was one of the ways of implementing the alternate education mode (Petrick 105). It incorporated update d scientific approaches to the

Qualities Important in Becoming an Officer in the United States Army Essay Example for Free

Qualities Important in Becoming an Officer in the United States Army Essay I don’t believe anyone could argue that it takes a good amount of leadership in order to become a successful United States Military Academy cadet, as well as an officer in the United States Army. This is almost certainly one of the first things someone would look for in a strong officer. A strong leader can impact his soldiers in various ways. If your soldiers don’t stand behind you, and don’t have faith in you, they are more prone to disagree with or disobey your orders. Aside from leadership, a USMA cadet should be able to easily demonstrate confidence. What good is an officer who knows what must be done, but cannot effectively stand in front of his soldiers and tell them what needs to be done? As an officer in the Army, there will be numerous times where you will need to speak to groups of soldiers of varying sizes. Whether it’s something as simple as giving a safety brief, or something more important such as a mission briefing, you will need to have confidence in yourself in order to accomplish this. A USMA cadet should also have integrity, which happens to be one of the seven army values as well. I define integrity as doing the right thing, even when you think no one is watching. Lacking integrity in the civilian world is one thing, however in the military it is incredibly more dangerous as it could result in the death of fellow soldiers or even yourself. For example if you’re on guard for the night and decide that you would rather catch up on your sleep, you are endangering yourself along with all your battle buddies. A successful Army officer is also going to benefit from having a willingness to learn. Although West Point will have done it’s very best to prepare you for the duties of an officer, there is only so much you can learn from a classroom environment. While a brand new 2nd Lieutenant Platoon Leader may outrank a Sergeant First Class, there is still a vast amount of knowledge that the new Lieutenant can pick up from that E7. In my short time in the Army I have noticed that the young Lieutenants are almost always willing to take advice from their senior noncommissioned officers. Another important quality in an Army officer is bravery. Even if you are not serving in a combat MOS, you never know when you will be required to be brave You also need to have the courage to stand up for what you believe in, and for what you know to be right. Another quality that will keep your soldiers on your side is loyalty. If you can’t stay loyal to your soldiers, they will not have as much motivation to stay loyal to you. That also ties into the obvious loyalty to your country that is required of any military member. There are so many integral qualities and morals that are required of an officer in the Army. Unfortunately I am restricted with the length of this essay, but I have tried to highlight what I believe to be some of the most important values that should be deep inside all officers. Without values and morals your character will most likely be lacking and who would want to follow you at that point?

Customer Relationship Management At Dell

Customer Relationship Management At Dell Introduction Customer Relationship Management (CRM), as defined by Anderson and Narus, is the bundling of customer strategy and processes, supported by relevant software, for the purpose of improving customer loyalty and, eventually, corporate profitability. Consultants Rigby, Reichheld and Schefter have mentioned the imperatives of CRM as acquiring the right customer, crafting the right value proposition, instituting the best processes, motivating employees, and learning to retain customers. This can be substantiated by studying the particular case of Dell, which has used internet and other direct media to develop an efficient model of CRM. This report will bring out the details of CRM process followed by Dell, and how it has helped in sustaining loyal customers and build customer satisfaction. About Dell Dell is a leading technology company which offers a broad range of product categories, including mobility products, desktop PCs, software and peripherals, servers and networking, services, and storage. As per a Gartner research report based on second quarter PC shipments in 2009, it is the number one supplier (26.0% market share in US) of computer systems in the United States and the number two supplier worldwide (13.6% global market share). The mission statement for Dell is to be the most successful computer company in the world at delivering the best customer experience. Since Dell is a global wide company, its direct approach is relevant across product lines, regions and customer segments.  [1]   Dell is organized geographically into the Americas, Asia-Pacific and Japan, and Europe. The corporate headquarters is located in Round Rock, Texas, near Austin. In the mid-1990s, the company decided that in order to manage a company that was growing at 50% a year, it needed to decentralize decision making rather than try to control everything from the U.S. Therefore, each of the regions has its own regional headquarters (Japan has a separate headquarters), its own manufacturing facilities, and its own IT infrastructure. Ongoing Customer Relationship Management at DELL Monitoring, Evaluating and Reassigning Accounts Dells business activities are organized in each region around different customer segments. These generally include (1) relationship (large corporate) customers, (2) home and small business (sometimes called transaction customers), and (3) public sector (government and educational) customers. This segmentation is evident in Dells product mix, which has different product lines for each segment, in its marketing strategies, which vary by business segments, and in its e-commerce and Internet strategies. For instance, services such as Premier.Dell.com extranets are geared toward large relationship customers, while a more limited set of online services is offered to home and small business customers on Dell.com. For large enterprise customers, Dell maintains a field sales force all over the world. There are dedicated account teams, including field-based system engineers and consultants, which form long-term relationships to create a single source of assistance for their largest customers, develop custom solutions for them and get important customer feedback. There are several programs to provide single points of contact and accountability with global account specialists, special global pricing and consistent global service and support programs. There are separate sales and marketing programs aimed at federal, state and local government agencies, and specific healthcare and educational customers. For small and medium businesses and consumers, marketing is done primarily by advertising on television and the Internet, print media and mailing a wide range of direct marketing publications such as promotional materials, catalogs and customer newsletters. Relationship and public sector customers account for about 54% of Dells revenues overall. All these accounts are initially serviced by field-based sales representatives along with a support team of telephone service reps dedicated to these accounts. Small businesses and consumers are served by several thousand phone reps who can look up historical sales records to help the customers in ordering systems that match their prior purchase pattern. Figure 1: Dells four customer aligned business units  [2]   Dells CRM Applications The Internet and e-commerce are fundamental to Dells business, as expected from a company that defines itself as an Internet infrastructure company. The e-commerce has been adopted into the core of the business in three ways: 1) in its relationships with end customers, (2) in coordinating its value web, and (3) in communicating its market message to emphasize its ability to provide e-commerce solutions to its customers. As per Anderson and Narus, some of the emerging applications of CRM, (that we can also observe in Dell) are in: Customer acquisition, retention and growth Synchronizing marketing efforts Updating delivered value Customer Acquisition, Retention and Growth Dell has involved the Internet in all aspects of customer relationships, ranging from customer acquisition, retention and growth to marketing. The internet is used in supporting existing channels such as the direct sales force and call centers by providing them with real time information and automating their routine tasks. It has also developed self-service tools for customers, using which they can order online, track order status or solve a technical problem through the Internet or an extranet. Acquisition Dell sells its own products at the dell.com website. On the homepage, customers in the U.S. are segmented into home and home office, medium and large organizations, Internet providers, health care businesses, federal government, state and local government, and education. Each customer segment has a different mix of products and services available. Customers can choose and price different configurations with Dells online configurator. Once they are ready to buy, their order is sent to a shopping cart. They can also choose various addons such as software, peripherals, digital cameras, PDAs, etc. on the Gigabuys or DellWare sites and add those to the same shopping cart. Once an order is entered, the customer receives an order number that can be used to track order status until it is delivered. Premier Pages are customized for every customer and they include capabilities for procurement, asset management, software upgrading, and even technical support. Large relationship customers can have Premier Pages customized even further to link to their own internal procurement systems, allowing their orders to be sent directly from the customers office information systems to Dells order management system. Dells account teams work with such customers to set up Premier Pages, setting access levels and registering user names and passwords for employees, and customizing the information and the kind of services that will be available. Dell also provides a few tools for customers to create their own pages. The various services available through Premier Pages include: _ Purchase history reports: The complete history of a customers purchases from Dell, including PO number, order number, date, SKUs, quantity, shipment dates. _ Standard configurations: To make a customers PC administration processes simpler (installation, upgrades, help desk, technical support), the customer can specify a definite set of configurations for different employees. These are made available for ordering on the customers Premier Pages at the price negotiated between Dell and the customer. _ Paperless online purchase orders: Dell and the customers sign a legal agreement that allows the customer to place orders without mailing or faxing a signed purchase order. This lets the entire ordering process, from configuration to payment, to be done online, saving time for the customer. _ ImageWatch: A roadmap of future product release plans made available to large enterprise customers to help them plan their own IT strategies. Dell relaunched its Premier Pages as DellPremier.com in September 2000 in the U.S with a new look and better navigation tools. Retention and Growth Service and support are normally quite an expensive and labor-intensive activity for PC companies, which need to provide technical support for complicated systems with a wide range of hardware and software configurations. Dell has an advantage here because most of its business is with large organizations that have their own MIS departments and technical help desks to support users. Home and small business support is usually provided directly to the end user, and costs more per PC to provide. Online support was originally developed by the Support Technology Online (STO) team, which grew up in the HSB (home and small business) segment as support.dell.com. In late 1999, Dell created separate STO groups for relationship and transaction customers, each part of those groups service organizations. Dell offers several service tools online. These are available online to home and small business customers at support.dell.com, and to relationship customers on the DellPremier.com extranet: _ Order status tracking Once an order is placed by the customers, they can track it until it is delivered. _ Resolution Assistant A software which is pre-loaded on a Dell PC that gathers information and sends it to a Dell technician when the customer faces a problem. The information is matched against an automated knowledge base. Whenever possible, a MAP, an executable module that automates resolution, is sent to the PC and the fix is done automatically. Resolution Assistant reduces the length of service calls and improves accuracy in diagnosis. _ Dell Knowledge Base A Dell database including product information, frequently asked questions, third party knowledge and other relevant documents specific to a particular Dell product. _ Ask Dudley A natural language searchable database of technical information which uses a customized version of the Ask-Jeeves search engine. _ File Library Downloadable drivers, utilities and other updates for Dell PC systems. _ Dell Software Tips -A library of hints and tips for operating systems and office applications. _ Pro-active services Pro-active notification services on warranty status, system age related information, file drivers, and the order status. _ Dell Talk-a monitored community forum for Dell customers to share information. Dell has built a community where its customers and loyalists can help each other with technical problems and questions. Dell doesnt censor the discussion on the forum, but monitors it regularly to ensure accuracy. If any user gives out incorrect information, Dell intervenes with the correct information. The users of this service are almost equally divided between relationship and transaction customers. With the launch of Dell Premier Support.dell.com in September 2000, Dell renamed its Help Tech service as Premier Support for relationship customers. Technical Support for corporate and public sector clients is handled by the Relationship Support Technology Online (STO) group. The primary customers for the Relationship STO are those individuals that support the end users belonging to corporate and public sector. This includes the personnel from help desks, MIS departments, IT professionals and technicians. Dells relationship customers have access to all of the online tools available to HSB customers, and also have customized applications relevant to their account for multiple systems and platforms. Unlike individual users, help desks and MIS organizations must deal with many systems, and with specific problems that arise from networking and client-server environments. For some large accounts, Dell itself may act as the help desk function for Dell equipment, as Dells technicians and o nline offerings have rich experience in troubleshooting and diagnosing system issues. Recently in February 2008, Dell launched its ProSupport portfolio of services. In this new framework, customers are able to self-identify the type of customer they are end users of IT professionals. Once the customers have self-identified, they are able to choose the features they need in the support package, thus customizing the support experience to their specific needs. The customer profile and history is very important in providing service and support. If the user enters a customer number or system identification number, he or she can get a personal support site that has the machine configuration and the history of what has happened with that machine since it was bought. The support strategy is based on what Dell calls virtual integration- getting customers closer to the knowledge, and inside out/outside in-giving the internal technicians the same set of tools and knowledge content as the outside customer. Dell gives customers a choice of venues for support, including phone and online support. They like people to use the web, but dont force them to. The breakdown of help incidents for HSB customers as of mid-2000 was as follows: _ 37% of incidents use the web alone for support _ 13% use both web and phone _ About 50% use the phone alone Dell finds that people who buy a PC online are more likely to get service and support there, while people who buy by phone will use phone service. Synchronizing Marketing Efforts The sales and marketing efforts of Dell are organized around the evolving needs of its customers. Its direct business model provides direct communication with its customers allowing it to refine its products and marketing programs for specific customer groups. Customers may offer suggestions for current and future Dell products, services, and operations on an interactive portion of its website called Dell IdeaStorm. This constant flow of communication allows Dell to rapidly gauge customer satisfaction and target new or existing products. For instance, Dell used a concept called free-range marketing  [3]  : allowing the community to drive the excitement and story about the new product, to create a buzz in social media using blogs, forums, communities etc. for the launch of their Inspiron 910 in September 2008. Updating Customer Value Dell interacts with more than 3 million customers every day, so it made sense for it to create a community to capture feedback from both customers and its 80,000 employees. Dell launched IdeaStorm, an interactive portal, to let customers share ideas that influence product development, services, and operations. Within the first week, IdeaStorm had collected more than 500 ideas; within the first month, it had 2,500 ideas.  [4]  Customer feedback on IdeaStorm led the company to build select consumer notebooks and desktops preinstalled with the Linux platform. Dell also decided to continue offering Windows XP as a preinstalled operating system option in response to customer requests. Dell also launched EmployeeStorm, a secure community employees can use to post ideas regardless of their position within the company. In the first 2 weeks, the company gathered more than 700 ideas. EmployeeStorm breaks down the silos typical in corporate life and increases collaboration Sustaining Customers through Connected Relationships Value Chain Dells core value chain for its PC business is different from that of a traditional value chain. Like others, it concentrated on building and selling PC systems, relying on others to supply components, software and services. However, it sold directly to the end user, cutting out the distributor and reseller. (Figures 2 and 3) Suppliers PC Maker Distributors Retailers, Resellers, Integrators Final Customer Figure 2: Indirect PC Value Chain Suppliers Dell Final Customer Figure 3: Dells Direct PC Value Chain However, with the expansion of Dell beyond selling simple PCs, its simple value chain has evolved into a new model that we call the value web or the virtual corporation. Value Web Figure 4: Dells Value Web: A virtual company There are three key aspects of the value web model of Dell: Dells central role in coordination and control of the value network, which is a result of its direct relationship with its end user. Being in direct touch with the customer requirements, Dell controls the flow of information to its business partners who provide the actual service. As shown in Figure 4, all the information flows are channeled through Dell. The close physical integration of Dell with its business partners and suppliers. The suppliers are normally located close to the plant and their personnel are located on the plant floor ordering material from their warehouse, based on information on Dells extranet. Such integration of material and information flow reduces inventory costs and creates an efficient supply chain, ultimately benefiting the end customer in the form of lower prices. The importance of internet and other electronic communications in allowing Dell to coordinate the web of close relationships through a constant flow of information between Dell and its partners. For example, if a customers hard drive crashes, the information travels from Dell technical support into Dells internal service and support systems. A new hard drive is ordered and dispatched to a Dell service provider, which sends a service engineer to install the drive. The information about the drive that crashed enters Dells databases and is conveyed to the supplier and plant that provided it for corrective actions. Customer Satisfaction For well-designed e-commerce services, the cost savings are not necessarily thought to go along with customer satisfaction. However, Dell has demonstrated that not only does it save money by selling directly on Internet, but also satisfies its customers better than any other sales model. Many business customers of Dell see Premier.Dell.com as a valuable management tool, helping their purchasing and IT departments to control purchasing decisions and enforce technology standards. Some customers (like Boeing) have integrated the Dell.Premier.com with their own ERP systems to allow online purchasing, making the ordering process much easier and more efficient for them. Not just purchasing, but also financial and IT departments of the customers benefit from Dells ability to provide a history of their purchases from Dell. All such benefits lead to better satisfaction among Dels core customer group of large business enterprises. While it is difficult to relate customer loyalty and repeat sales directly to the Internet and ecommerce, there is strong evidence that the Dell Premier.com services are a factor in helping Dell gain repeat business and achieve sole supplier status with some large customers. Some of this is from the convenience provided by Premier services and some from customer lock-in created by the electronic linkage of business processes between Dell and its customers. In a 2007 survey, Forrester  [5]  asked 565 PC decision-makers at North American and European enterprises about their satisfaction with their primary PC supplier on various parameters. The performance of Dell and its main competitors on these parameters is shown below: Dell HP Lenovo Overall Product features 44% 38% 46% 43% Product quality 51% 49% 59% 52% Price 43% 38% 33% 40% Product support 46% 31% 46% 43% Business relationship 37% 27% 45% 37% Repeat purchase of desktops 86% 74% 71% -NA- Repeat purchase of laptops 89% 75% 75% -NA- From the table, it is quite evident that Dell leads the industry on Price and Product support. It is rated on par with Lenovo on Product features and Product quality, however, it lags behind Lenovo on the key parameter of business relationship. The survey found that the most likely reason for this is a lack of communication, combined with rotating account representatives. Another reason was the absence of a product roadmap which would help the customer managers to prepare their corporate IT environment for the next few years. However, Dell scores very highly on a critical indicator of customer satisfaction i.e. a repeat purchase. The enterprise buyers gave big thumbs up to Dell on this front, with 86% ready to repeat purchase of desktops and 89% for laptops. CONCLUSIONS Dell has performed admirably on its efforts towards ongoing Customer Relationship Management. It has developed efficient systems and processes for customer acquisition, retention and growth, using online tools such as Premier.Dell.com, ProSupport and IdeaStorm. Therefore, many of the concepts discussed by Anderson and Narus in Business Market Management are substantially demonstrated in the case study of Dells CRM process. There are many lessons learned from Dells experience. These lessons can be transferred to other companies in the industry. Ensure better customer service is offered. Dell has become an industry leader in service and reliability. Dell has used CRM to its advantage. This has instilled trust into their customers. By custom-building a computer that the customer desires, this has created a very strong relationship with the customers. Implement technology in a phased fashion Dell tested key tasks in each of its regions prior to deployment. It set-up mock environments to develop, test, and support the i2 systems in patches without disrupting the live version. Dell was able to bring on one piece of the i2 system at a time. As one part became more efficient, then Dell added other components in stages. Dell ensured that each stage of the process performed well and allowed for future growth before rolling out the entire system. This minimized the risk, while at the same time increasing efficiency. Extend the connection from the customer to the supplier Dell was able to extend its build-to-order model from suppliers to the customer while continuing to maximize operational efficiency and customer satisfaction. Customers were able to save money while being able to purchase a customized machine because Dell passed on the savings, which resulted from efficient inventory management, no excess inventory or inventory shortages. It was able to share, in real-time, information with suppliers about customer demands and buying patterns.

Comparing the Concepts of Authority and Individualism in Literature :: Shawshank Redemption Fahrenheit 451 Essays

Comparing the Concepts of Authority and Individualism in Literature Authority is defined as a person or group of people who control the society and make major decisions affecting the society. Individual is a person who has no particular influence on the society and neither do his decisions. The term Authority may be applied to any type of people who hold some sort of influence or power on the society such as The Police; Courts from local courts to supreme courts and of course the ruling party of the government. The individual may be a single civilian. This essay will compare and contrast the way the following text types present the concept of Authority and the individual: Fahrenheit 451, by Ray Bradbury; Billy Budd, by Hermann Melville; Shawshank Redemption, by Hollywood Studios; And the poem Naming of parts by Henry Reed. It will discuss how symbolism, language of features, themes, and text form contributes to the way they present the idea of Authority and Individual. It will also discuss the state of Authority in that particular text type (for example is the Authority right or wrong in it’s believes and practices), Fahrenheit 451 is a book written by Ray Bradbury, set in a futuristic society, about a fireman named Guy Montag whose job is to go and burn the books, which are forbidden, being the source of all discord and unhappiness. The two main themes in this novel are Social change and the banning of books to stop inequality and Individualism. One of the changes the Authority is responsible in this novel is Social change. Their main purpose is to not let the individual think alone. The Authority does this by giving individuals no time to think, as captain Beatty puts it: ‘Give them zippers instead of buttons’ (pg 63) Clarisee also says in School, children are given fun activities, are blasted with useless facts and information, and given no time to ask questions. In the world of Fahrenheit 451 the books are banned. Figures of Authority believe that books create inequality by creating an educated class: ‘We must all be alike. Not everyone born free and equal, as the constitution says, but everyone made equal. Each man the image of every other†¦Ã¢â‚¬â„¢(pg 65) Books present readers with conflicting views, thus causing confusion: ‘We stand against the small tide of those who want to make everyone unhappy with conflicting theory and thought’ (pg 69)

Boss Mustang :: essays research papers

1997 329 BOSS Coupe The 1997 329 BOSS Coupe is great. It has excellent ratings from consumer magazines. The BOSS can go from 0-60 in 3.2 seconds. 0-60 in 3.2 seconds is outstanding compared to many sport ¡Ã‚ ¦s cars. This car was just released to customers like ourselves 2 weeks ago. One-thousand of these have already been sold around the United States.   Ã‚  Ã‚  Ã‚  Ã‚  Consumer Magazine rated this car so high that people were calling the publisher of the magazine and asking if it was a joke. The editor said it was no joke, and I ¡Ã‚ ¦ll tell you the same. The BOSS comes with a V-10 engine which was tested and tested at the BOSS plant to be top of the line. This great car also comes with a 6-speed manual transmission.   Ã‚  Ã‚  Ã‚  Ã‚  I would like to hear from you what you think of the 329 BOSS Coupe. Here ¡Ã‚ ¦s some statistics on the 329 BOSS. „h V-10 Engine „h 425 horsepower „h 0-60 in 3.2 seconds „h 6-speed manual transmission „h composite body „h much, much more   Ã‚  Ã‚  Ã‚  Ã‚  The 329 BOSS is not a big car at all. In fact the BOSS is short. The reason the car is so short and arrow-dynamic is so the car can get more speed when flying down the road. The BOSS is a 4-seater with comfortable space for children. I myself have been privileged enough to drive this car. The first thing I noticed when driving the car was the smoothness it had. This car was extremely light, 2164 pounds. Motor World has examined this car from front to back and give it a perfect 10. Every magazine I ¡Ã‚ ¦ve looked at has rated this car no lower than a 8.5 which is still extremely high. This car itself has the looks, drive, and speed to out perform any major sports car on the market.   Ã‚  Ã‚  Ã‚  Ã‚  I would ask any of my readers to go to their local BOSS dealer and get a test drive on this car. I know you ¡Ã‚ ¦ll love it as much as me and more. I ¡Ã‚ ¦m encouraging you to tell your friends about this car. and how great it is.   Ã‚  Ã‚  Ã‚  Ã‚  Oops! I haven ¡Ã‚ ¦t told you the top speed for this car. It can top 270 and has even been known to get in the 280 ¡Ã‚ ¦s.   Ã‚  Ã‚  Ã‚  Ã‚  Have I given you the impression that this is the best car of the year? If not then please write me a letter telling me what you don ¡Ã‚ ¦t understand or believe.